| Product Range |
|
 |
|
Ball Valve > Trunnion Type > 3Piece Design
| |
|
| |
| Rating / Size : |
| Class 150 – DN15 to 400 (1/2” to 16”) |
| Class 300 – DN15 to 600 (1/2” to 24”) |
| Class 600 – DN15 to 600 (1/2” to 24”) |
| Class 900 – DN15 to 250 (1/2” to 10”) |
| Class 900 – DN15 to 400 (1/2” to 16”) |
| Class 1500 – DN15 to 300 (1/2” to 12”) |
| Class 2500 – DN15 to 200 (1/2” to 8”) |
| Standards |
|
| Design Standard : |
API-6D, ANSI B16.34, EN 12516.2, ASME Sec. VIII, BS 5351, EN 17292 |
| Face to Face : |
ASME B 16.10 |
| Flange Drilling : |
ASME B 16.5, EN1092, ASME B 16.25, ASME B16.11, JIS B 2220 |
| Testing : |
API 598, ANSI / FCI 70-2, EN 1226-1, ISO-5208 |
| End Connection : |
F.F., R.F., RTJ, Buttweld, Socketweld, Screwed NPTF |
| Shell Materials |
ASTM A216 Gr. WCB, ASTM A351 Gr. CF8, ASTM A351 Gr. CF8M
ASTM A351 Gr. CF3, ASTM A351 Gr. CF3M, ASTM A351 Gr. CN7M
ASTM A995 Gr. CD4MCuN, ASTM A995 Gr. CD3MN
ASTM A352 Gr. LCB, ASTM A494 Gr. N-12MV
ASTM A494 Gr. CW-12MW, ASTM A494 Gr. M-35-1
URANUS B6 SS904L (UB6), ASTM A 105
ASTM A 350 LF2, ASTM A182 Gr. F304, ASTM A182 Gr. F316 |
| Ball / Stem |
|
|
| Materials |
Cast |
Wrought |
| 410 |
ASTM A217 Gr. CA 15 |
ASTM A276 TP 410 |
| 304 |
ASTM A351 Gr. CF8 |
ASTM A276 TP 304 |
| 316 |
ASTM A351 Gr. CF8M |
ASTM A276 TP 316 |
| 304L |
ASTM A351 Gr. CF3 |
ASTM A276 Gr. 304L |
| 316L |
ASTM A351 Gr. CF3M |
ASTM A276 Gr. 316L |
| 17-4 PH |
ASTM A747 Gr. CB7Cu-1 |
ASTM A564 TP 630 (17-4PH) |
| Monel |
ASTM A494 Gr. M-35-1 |
ASTM B164 TP 4400 |
| S3 10803 |
ASTM A890 Gr. CD4MCu |
UNS S3 1803 |
| Seat, Stem Seal, Body Seal |
| Seat, Stem Seal : |
PTFE / GFT / CFT / DELRIN / NYLON / PEEK |
| Body Seal : |
PTFE / GRAFOIL / SPW + GRAFOIL |
| Features |
| Available in manual operated & actuated control |
| Double Block & bleed, |
| Antistatic Design |
| Blow out proof stem |
| Pup piece, design (Extended nipple) |
| Pigging construction |
| Material certification as per EN 10204-3.1, EN 10204-3.2 (Third Party Inspection) & NACE MR-01-75 |
|
| |
| |
| |
|
| |
|
