Latest Products http://www.valvola.com Latest Products Fri, 11 May 2018 11:09:14 +0530 en-us http://www.valvola.com Flush Bottom Type Ball Valves http://www.valvola.com/flush-bottom-type-ball-valves-supplier.htm http://www.valvola.com/flush-bottom-type-ball-valves-supplier.htm Wed, 09 May 2018 00:00:00 +0530 Features of Flush Bottom Ball Valves : Better flow capacity for line size. Suitable for drainage system. Tight closing for reliable shut-off even after change in pressure & temperature is sudden and extreme. Wide selection of actuator to meet stringent process requirement. Flexible design capabilities allows fitting in any vessel configuration. Measurement temperature is available with built-in thermometer. Jacketed option available (Full jacketed & Semi jacketed) Unique packing designs to suit various temperature & fluid needs. Excellent shut-off performance. Valve Size : NPS 1” to 8” ( DN 25 to DN 200 ) Pressure Rating : ANSI 150#, 300# & 600# Equivalent to BS 10, DIN, IS, JIS etc. Body Material : Carbon Steel, Stainless Steel, Duplex, Super Duplex, Monel, Inconel, Hastelloy, Aluminum, Bronze and Higher Alloys available on request. Plug Options : Contoured Flow Characteristics : ON – OFF End Connection : Flanged (RF, TG) Leakage Class : Class IV & V ( Metal to metal seated ) & Class VI ( Soft seated ) as per FCI 70-2 Temperature Range : -73 to 500°C Manual Over-ride : Top Mounted Version, Side Mounted Version   Product Specification : Valve Size : NPS 1” to 8” ( DN 25 to DN 200 ) Pressure Rating : ANSI 150#, 300# & 600# Equivalent to BS 10, DIN, IS, JIS etc. Body Material : Carbon Steel, Stainless Steel, Duplex, Super Duplex, Monel, Inconel, Hastelloy, Aluminum, Bronze and Higher Alloys available on request. Plug Options : Contoured Flow Characteristics : ON – OFF   Design Flexibility : The outlet flange is 45 Deg inclined to the axis of the valve. These valves are available in two types of constructions, one the plug opens into the vessels & second the plug opens into the valve body. These valves are available with actuators and manual operated. Special temperature sensing arrangement within the valve body itself also can be provided. Also the body can be provided with steam / oil / hot water jacketing arrangement to avoid solidification where in some application fluid tend to solidify at low temperature and discharged in hot condition only. These valves are compact, lightweight design and ideal for inline maintenance under the tank.   Design Standard : Design Standard : ASME B16.34 & SFS EN 12516 Testing Standard : ANSI / FCI 70-2 Face to Face : As per manufactures standards Flange Fitting : ANSI B16.5, 150#, 300# & 600#   Actuator Type : Pneumatic Diaphragm Actuator Pneumatic Cylinder Actuator Electrical Actuator   Accessories : Pneumatic valve positioner Electro – Pneumatic valve positioner Air filter regulator Solenoid valve Limit switches Proximity switches Air lock relay Volume booster Other accessories available on request Y-Type Strainer Valve http://www.valvola.com/y-type-strainer-valve-supplier.htm http://www.valvola.com/y-type-strainer-valve-supplier.htm Fri, 04 May 2018 00:00:00 +0530 Class 150 Flanged End Connections Sure Flow Class 150 ASME Flanged strainers are available in Carbon Steel and Stainless Steel. A Machined, tapered seat ensures a perfect fit for the removable, stainless steel screen. Size 2” and larger come complete with flanged blow-off cover, gasket & plug. 1 ½” and smaller come complete with solid threaded cover and gasket. May be installed in vertical or horizontal pipelines with blow-off connection at the lower end of the screen.Construction : Carbon Steel - Body, Cover – ASTM A216 Grade WCB Stainless Steel : Body, Cover – ASTM A351 Grade CF8M All screens are Stainless Steel Must specify if for steam service - Sizes 14” and larger are available in cast steel only. Manufacturer reserves the right to modify dimensions, materials, or design. consult factory for certification.   Applications : Pump protection Flow meter protection Valve and regulator protection Protection of heat exchanger and refrigerating set Protection of steam traps Instrumentation and ancillary piping item protection   Features : Easy Cleaning or replacing the element. Compact size and low weight. Low pressure drop across the filter. Low installation and maintenance. With Drain arrangement of request. Adequate strength of element and housing. Interchangeability of component with another of same type. Single Piece Ball Valve http://www.valvola.com/single-piece-ball-valve-manufacturer.htm http://www.valvola.com/single-piece-ball-valve-manufacturer.htm Wed, 09 May 2018 00:00:00 +0530 Our team professionals ensure that the products we offer are sternly manufactured using the certified array of raw materials. We conduct strict quality checks while sourcing the raw material. With the aid of modern facility and quality packaging material, we guarantee that the offered lot will reach the destination within a given time frame. We also make sure that the material is sourced from the certified vendors. API 6D design valves are also available on demand Butterfly Valve http://www.valvola.com/butterfly-valve-manufacturer.htm http://www.valvola.com/butterfly-valve-manufacturer.htm Fri, 04 May 2018 00:00:00 +0530 Feature & Benefits : Longer Life : The strength of the vulcanised liner as well as its strong bonding with the body ensure that it doesn’t get deformed and torn by the disc during valve operations. Further, friction during operations is minimized owing to the smooth liner surface. The strong seat and reduced friction greatly enhance service life of the valve. Tight Sealing and Consistent Low Torque : Bubble-tight sealing is obtained by the tight interference fit between liner and disc. The insitu moulded seat does not deform with age, and hence the operating torque stays low and consistent during the entire life cycle of the valve. High reliability and consistent torque make Aquaseal the ideal valve for actuated systems. Assured Shaft Sealing : The flat profiles on the top and bottom of Aquaseal Plus disc engage with matching profiles on the body liner, and the large area of contact prevents leakage to atmosphere. Integrally molded O-Ring that compresses around the blowout-proof shaft provide a secondary seal. Actuator Mounting Platform : The integral ISO 5211 platform facilitates direct mounting of actuators and gear units, thereby improving system reliability and efficiency. Enhanced Reliability : The rugged body is designed to withstand pipeline stresses and vibrations. Further, enhanced liner thickness assures reliable performance over an extended service. Reinforcements are provided on Aquaseal disc also. Lower Torque, Longer Life : The Aquaseal disc is profiled for smoother flow. Further the coating/ encapsulation of Nylon and EPDM on the disc helps to reduce torque and prevent disc damage. Reliable Drive : In Aquaseal a two-piece shaft is employed for closer control and smooth operation. The shaft is Xylan-coated to reduce friction and improve wear resistance. While the square shaft provides positive drive, the bottom shaft acts as a pivot for operational ease. Accessories : Extension spindle Street covers Handwheel Stem cap for rod Adaptor gearside Post indicator Dismantling joint Combi-flange Adaptors different types of gearboxes and electric actuators Double eccentric butterfly valve, for water to max. 70° C, designed according to EN 593, Face to face according to EN 558 table 2 basic series 14. Standard flange drilling to EN1092-2 (ISO 7005-2) Hydraulic test according to EN 1074-1 and 2 / EN 12266. Double eccentric design : The double eccentric design gives minimal wear of the disc seal, as the disc swings open/close like a door relieving the stress on the seal just after a few degrees of opening. The seal is fully compressed in closed position which gives 100% drip-tight closure. The disc and seat are designed to give the lowest possible operating torque in opening and closing direction at full differential pressure.Shaft sealing : Encapsulated O-rings, self-lubricating bearings and bronze bushings protect against galvanic corrosion.Disc and seat design : The slim and streamlined disc design ensures low pressure loss across the valve, and the disc enables bi-directional flow. The seat is casted in the valve body, which is epoxy coated to avoid corrosion. The disc seals are mounted in a stainless steel retainer ring, and are exchangeable independent of flow direction. The disc is fixed by means of a keyway and set screws protecting against flutter between shaft and disc. Three Way Ball Valve http://www.valvola.com/three-way-ball-valve-manufacturer.htm http://www.valvola.com/three-way-ball-valve-manufacturer.htm Wed, 09 May 2018 00:00:00 +0530 Standard Features : Available in “T” or “L” Port configurations Full Port Actuator Mounting Pad Blow-out-proof stem Investment cast Operating / Test Conditions : Operating Temperature Range -200 to 4500 F End Type : Threaded to ANSI B2.1 100% air tested under water at 80 PSI Maximum Working Pressure : 1000 PSI CWP (1/4” – 1”) 800 PSI CWP (1 1/4” – 2”) Benefits : Reduces number of valves required in piping system Full port construction improves flow characteristics Standard mounting pad for ease of automation Live-loaded stem packing improves cycle life Balanced 4 seat construction provides for positive shut off Two-Piece Trunnion Mounted Ball Valve http://www.valvola.com/two-piece-trunnion-mounted-ball-valve-exporter.htm http://www.valvola.com/two-piece-trunnion-mounted-ball-valve-exporter.htm Wed, 09 May 2018 00:00:00 +0530 Thanks to our modern transit facility, that ensures safe delivery of the orders at required destinations. We have streamlined inventory system and spacious warehouse that assist us in meeting the voluminous requirements of the clients and that too in the stipulated time span. With the latest facilities, we efficiently ensure year round availability of the products. Check Valve http://www.valvola.com/check-valve-supplier.htm http://www.valvola.com/check-valve-supplier.htm Fri, 04 May 2018 00:00:00 +0530 Details : Conventional Port Opening, Piston, Ball or Swing NPS 1/4-2 (DN 8-50), ASME CLASS 800, 1500  Ball type only.  2) Swing type only.  3) Bolted bonnet only Piston or swing type only  5) Piston or ball type only Bolted bonnet swing check disc CoCr alloy Gr. 6 only Jacketed Type Ball Valves http://www.valvola.com/jacketed-type-ball-valves-manufacturer.htm http://www.valvola.com/jacketed-type-ball-valves-manufacturer.htm Wed, 09 May 2018 00:00:00 +0530 Piping : When piping the jacketed ball valves, check that no foreign objects will block the inlet, outlet or draining port. Proper piping enables the steam to flow more effectively to warm the jacketed area.All Types of Jacketed Valve Body Materials (MOC – Material of Construction)  : Cast Carbon Steel  -  A 216 GR WCB, K03504, 1.0460 Low Temperature Carbon Steel – LTCS  -  A 352 LCB, A 352 LCC, K03011, 1.0566 Alloy Steel Chrome Moly  -  A 217 C5, A 217 C12, A 217 C12A, A 217 WC6, A 217 WC9, K11752, K 21590, K41545, K90941, 1.7335, 1.7380, 1.7362, 1.7386, 1.4903 Austenitic Stainless Steel  -  A 351 CF8, A 351 CF3, A 351 CF10, A 351 CF8, A 351 CF3M, A 3510 CF10, A 351 CF8C, S30400, S30403, S30409, S31600, S31603, S31609, S34700, S31703, 1.4301, 1.4306, 1.4401, 1.4404, 1.4550, 1.4438 Alloy 20  -  A 351 CN7M, N08020, 1.4438 Duplex Steel 2205  -  A 351 CD 3MN, A 890 J92205, S31803, S32202, 1.4462 Super Duplex Steel 2507  -  A 351 CD4MCu, A 890 5A, S32750, 1.4501 Super Duplex F55  -  A 995 CD3MWCuN, S32760 Hastelloy C-276  -  A 494 CW 2M, N10276, 2.4819 Broad Choice of Jacket Material for Jacketed Valve to Match Process Requirement  : Carbon Steel Seamless Pipe  -  ASTM A 106 GR. A/B/C Low Temperature Carbon Steel Pipe  -  ASTM A 333 GR. 6 Austenitic Stainless Steel 304 / 316 Pipe  -  ASTM A 312 TYPE 304 / 316 Austenitic Stainless Steel 304L / 316L Pipe  -  ASTM A 312 TYPE 304L / 316L Duplex Steel Pipes  -  ASTM / ASME SA 790 – S 31803/S 32205/S 32550/S32750/S 32760 Bellow Seal Gate Valve http://www.valvola.com/bellow-seal-gate-valve-manufacturer.htm http://www.valvola.com/bellow-seal-gate-valve-manufacturer.htm Fri, 04 May 2018 00:00:00 +0530 Technical Data : Valve Designed to API – 600 / BS – 1414 Valve Tested to API – 598 / BS – 5146 Flanged End as per ANSI – B 16.5 Face to Face as per ANSI – B – 16.10 Valve Designed to API-602 / BS – 5352 (Reduced Bore) Valve Tested to API – 598 / BS – 5146 Socket Weld End as ANSI-B-16.11 Screwed End as per ANSI-B1.20.1 (NPT) Butt Weld End as per ANSI-B-16.25 with end pups End to End as per manufacturers spec. Accessories : Pneumatic Actuators Electric Actuators Floor Columns By-Pass Piping Hand Wheel Locking Arrangement Extended Stem Design Actuator Mounted Valve Notes : Optional Stellited Wedge & Seat Sizes above 250 mm have two piece Bonnet Valve upto 40 mm NB are from forging Optional Full port Design upto 40 mm NB Also Manufactured in ASTM-A 182 Gr. F304L / F316L Optional Stellited Seat & Wedge Optional Screwed Ends (BSP / NPT) Optional Butt Weld Ends Alternate Bellow Material - HC-276 / Inconel/625/Monel 400 Three Piece Ball Valve http://www.valvola.com/three-piece-ball-valve-manufacturer.htm http://www.valvola.com/three-piece-ball-valve-manufacturer.htm Wed, 09 May 2018 00:00:00 +0530 Quality control is a huge part of our company and we make sure, all our products are quality assured and trustworthy. As a dependable name, we make sure that our products are of excellent quality. To make it possible, we use only quality-approved and certified raw materials sourced from reliable vendors. Bellow Seal Globe Valve http://www.valvola.com/bellow-seal-globe-valve-manufacturer.htm http://www.valvola.com/bellow-seal-globe-valve-manufacturer.htm Fri, 04 May 2018 00:00:00 +0530 Technical Data : Valve Designed to BS – 1873 Valve Tested to API – 598 / BS – 5146 Flanged End as per ANSI – B 16.5 Face to Face as per ANSI – B – 16.10 Valve Designed to BS – 5352 (Reduced Bore) Valve Tested to API – 598 / BS – 5146 Socket Weld End as per ANSI-B16.11 Butt Weld End as per ANSI-B-16.25 with end pups Screwed End as per ANSI-B-1.20.1 (NPT) End to End as per manufacturers spec. Accessories : Pneumatic Actuators Electric Actuators Floor Columns By-Pass Piping Hand Wheel Locking Arrangement Extended Stem Design Actuator Mounted Valve Notes : Optional Stellited Plug & Seat Alternate Bellow Material HC-276/MONEL-400 / INCONEL-600/625 Valve upto 40 mm NB are from forging Optional Full port Design upto 40 mm NB Also Manufactured in ASTM-A 182 Gr. F304L / F316L Optional Stellited Seat & Plug Optional Screwed Ends (BSP / NPT) Optional Butt Weld Ends Alternate Bellow Material : HC-276 / Inconel/625/Monel 400 Stainless Steel Flanges http://www.valvola.com/stainless-steel-flanges-supplier.htm http://www.valvola.com/stainless-steel-flanges-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Types  : Weldneck SORF BLRF Slipon High Hub Socket Weld Flat Face Threaded Ring Type Joint Groove & Tongue Expander Spectacle Standards : ASME B16.5 ASME B16.36 ASME B16.47 API 6A EN 1092-1 EN 1098 BS 10 B2291 JIS B2220. Size 1/2” – 24” Pressure Rating Class 150 to Class 2500 PN 6 – PN 100 Table D, E, F. Features : Heat code traceability 100% material annealed & passivated High quality steel finish Three chambers cleaning system ( Surface preparation, Ultrasonic Degreasing, Hot Dry Air.) Notes : (For 150# & 300# Class) This dimension is for large end of hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges. This dimension is defined as the diameter at the intersection between the hub taper and back face of the flange. The minimum thickness of these loose flanges, in sizes NPS 3 ½ and smaller, is slightly greater than the thickness of flanges on fittings, which are reinforced by being cast integral with the body of the fitting. For Class 300 these flanges may be supplied with a flat face. The flat face may be either the full tf dimension of thickness plus 2 mm or the tf dimension thickness without the raised face height. Dimensions in Column 15 correspond to the inside diameters of pipe as given in ASME B36.10M for standard wall pipe. Thickness of standard wall is the same as Schedules. To be specified by the Purchaser. 2.0 mm (0.06 in.) raised face for Class 150 and 300 raised face flanges Threadolet Olets http://www.valvola.com/threadolet-olets-manufacturer.htm http://www.valvola.com/threadolet-olets-manufacturer.htm Fri, 13 Apr 2018 00:00:00 +0530 Types  : Weldolet Sockolet   Threadolet   Nipolet   Elbolet   Threaded Elbolet Socket Weld Elbolet   Sweepolet   Insert Weldolet   Brazolet   Coupolet Flexolet Buttweld   Flexolet Socket Weld  Nipo Flange. Standards      B16.11   MSS SP 79   MSS SP 83 MSS SP 97   MSS SP 95 Size -1/4” – 24” Pressure Rating      Socket Weld - #3000 / #6000 / #9000. Thread - #2000 / #3000 / #6000 Butt Weld - SCH 10 / 40 / 80 / 160 / XXS   Features : Heat code traceability 100% Material annealed & Passivated High quality surface CNC Machined finish Three chambers cleaning system (Surface Preparation, Ultrasonic degreasing,  Hot Dry Air) Note : Dimension D = internal diameter of run pipe Sockolet Olets http://www.valvola.com/sockolet-olets-supplier.htm http://www.valvola.com/sockolet-olets-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 As, we have a well-organized resource chain system, our organization is capable of fulfilling wholesale consignments with ease and make on time deliveries. Rooted in Mumbai(India), the company is providing qualitative products and that too at the most reasonable prices.   Note : Dimension D = internal diameter of run pipe Latrolet Olets http://www.valvola.com/latrolet-olets-supplier.htm http://www.valvola.com/latrolet-olets-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 We make smooth and on-time deliveries of the product range that we keep safe in our capacious inventory. Get in touch with us for acquiring qualitative and cost efficient Latrolet Olets! 45° Branch Connections Threaded, Socket-weld and Butt-weld Ends Elbolet Olets http://www.valvola.com/elbolet-olets-manufacturer.htm http://www.valvola.com/elbolet-olets-manufacturer.htm Fri, 13 Apr 2018 00:00:00 +0530 We take care of all the raw materials used in the product manufacturing and designing. The inputs (raw material) used are quality certified and are remarkable for the production. The products are strictly packed and dispatched safely to the clients stated address and that too in the committed time span. Nipolet Olets http://www.valvola.com/nipolet-olets-supplier.htm http://www.valvola.com/nipolet-olets-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 We have installed a large storage facility wherein we keep a large stock of the offerings. This facility helps us in keeping the entire lot away from the damaging factors like moisture, sunlight, dust, rain, etc. With us, one can stay completely assured for top-notch quality products that are designed and developed using the premium material and cutting-edge techniques. Also, we ensure that the material is sourced from the reliable places only. Sweepolet Olets http://www.valvola.com/sweepolet-olets-supplier.htm http://www.valvola.com/sweepolet-olets-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Our product range is secured properly with premium packaging materials that protect the products from mechanical damage and ensure the product delivery is safe and without damage. In order to attain complete client satisfaction, we make sure that the offered lot is prepared using the best quality material. For this, we have tied-up with the leading names who assure us for the quality. Female Threaded Couplers http://www.valvola.com/female-threaded-couplers-supplier.htm http://www.valvola.com/female-threaded-couplers-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Reckoned for the exceptional Pipe Coupolets; we are a trustworthy Supplier in this domain. Rest assured for the safety of the products as we have the best facilities at our end. In addition, we have appointed a responsible staff to keep a vigil eye over the same. Weld Male Connector http://www.valvola.com/weld-male-connector-manufacturer.htm http://www.valvola.com/weld-male-connector-manufacturer.htm Fri, 13 Apr 2018 00:00:00 +0530 Being a quality conscious firm, we conduct strict quality checks for ensuring the product quality. Defined as one of the celebrated names in the market, we are involved in offering excellent quality Weld Male Connector. Weld Male Elbow http://www.valvola.com/weld-male-elbow-exporter.htm http://www.valvola.com/weld-male-elbow-exporter.htm Fri, 13 Apr 2018 00:00:00 +0530 The range is 100% quality checked and you can rest assured us for the same. We along with our quality auditors make certain that even the raw material used go through varied stages of checking. Consider our name for purchasing top-of-the-line quality Weld Male Elbow at competitively low prices. Weld Female Connector http://www.valvola.com/weld-female-connector-supplier.htm http://www.valvola.com/weld-female-connector-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 In order to pace with the technology, we have developed a payment procedure that allows us to make safe and secure transactions. Also, our system is verified by authority. The quality analysis system, we have, is headed by a pool of professional quality experts having rich domain experience. Weld Female Elbow http://www.valvola.com/weld-female-elbow-manufacturer.htm http://www.valvola.com/weld-female-elbow-manufacturer.htm Fri, 13 Apr 2018 00:00:00 +0530 Our streamlined inventory system and capacious warehouse assist us in meeting the bulk requirements of the customers. Also, we ensure year round availability of the products. To maintain optimum product environment, we use superior grade packaging material that is nontoxic. The labels on packs provide products details clearly and are smudge-proof. Weld Union http://www.valvola.com/weld-union-supplier.htm http://www.valvola.com/weld-union-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 We have parted our infrastructure into several units and one of them is storehouse. We update it on regular basis so as to meet stated industry standards. In order to keep transparency in dealings, we offer our clients an invoice including the details of the products, quantities and price on which both the parties agreed for the payment. Moreover, our payment procedure is safe. Weld Union Elbow http://www.valvola.com/weld-union-elbow-supplier.htm http://www.valvola.com/weld-union-elbow-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Be it any place or time; we make on time deliveries of the goods to the customers. With the assistance of advanced machines, equipment and quality packing material, we pack the products in safe and rapid manner. In addition, we make sure that the entire lot is checked before dispatch. Weld Union Tee http://www.valvola.com/weld-union-tee-supplier.htm http://www.valvola.com/weld-union-tee-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 By following the international quality standards, we procure raw materials only from the trusted vendors. Thus, we make sure that our finished products are superior and flawless. For the attainment of complete client satisfaction, we offer them both online or offline payment procedures. In addition to this, we guarantee safe and secure transactions. Weld Union Cross http://www.valvola.com/weld-union-cross-supplier.htm http://www.valvola.com/weld-union-cross-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 We offer secured online and offline payment processing methods. The transaction, done through online mode, is instantly forwarded to the payment system. We also accept bank account transfers, cash payments, etc. We have a dedicated staff that ensures the quality of material used for designing and production. The inspection is done on the initial stages to make the final product free from defect. Weld Tube Reducing Adapter http://www.valvola.com/weld-tube-reducing-adapter-supplier.htm http://www.valvola.com/weld-tube-reducing-adapter-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Clients can approach us for placing orders, timely deliveries of the same are guaranteed with us. We are appreciated amidst the celebrated names in the sphere of providing exclusive range that includes Weld Tube Reducing Adapter. Weld Pipe Reducing Adapter http://www.valvola.com/weld-pipe-reducing-adapter-supplier.htm http://www.valvola.com/weld-pipe-reducing-adapter-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Experts' assistance is what makes our packaging reliable and highly durable as well. The packaging material used is certified and experts approved to ensure complete safety. We have hired quality auditors who keep a strict check on the quality of the raw materials and also check the inputs against varied quality parameters before procuring them. Butt Weld Fittings http://www.valvola.com/butt-weld-fittings-supplier.htm http://www.valvola.com/butt-weld-fittings-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Since, we have collaborated with numerous distributors; we can cater to buyers all over Mumbai(India) and other markets. Strong industrial base along with a wide area network, we deliver the range in the stipulated time span. Hose Tube Adapter http://www.valvola.com/hose-tube-adapter-supplier.htm http://www.valvola.com/hose-tube-adapter-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 We are a trustworthy Supplier offering a wide assortment of Hose Tube Adapter in the market. Capitalizing on an efficient industrial network, our organization has made coalitions with numerous reputed logistics solution sources. Thus, we can ensure on time distribution of consignments. Hose Male Adapter http://www.valvola.com/hose-male-adapter-supplier.htm http://www.valvola.com/hose-male-adapter-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Interested buyers can place orders with us, timely delivery of the same are our foremost concern. We are a client centric firm and make sure that the entire lot is provided in premium packaging for ensuring complete safety during handling, warehousing and transit. Serrated Hose Port Connector http://www.valvola.com/serrated-hose-port-connector-exporter.htm http://www.valvola.com/serrated-hose-port-connector-exporter.htm Fri, 13 Apr 2018 00:00:00 +0530 In order to produce quality products, we make use of superior grade raw materials. Our quality auditors strictly check the raw materials against varied quality parameters before procurement. We own a well-structured warehouse with the help of which we are capable of delivering a flawless range of products. So, you can stay rest assured with us for damage-free products. Barbed Male Adapter http://www.valvola.com/barbed-male-adapter-supplier.htm http://www.valvola.com/barbed-male-adapter-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Our well-structured warehouse is properly maintained and installed with diverse amenities required for the safe storage of the products. Moreover, we keep on updating the unit for enhanced safety. Clients' security is what we are concerned about and to eliminate this issue, we use leading technologies to make online and offline payments. Barbed Tube Adapter http://www.valvola.com/barbed-tube-adapter-supplier.htm http://www.valvola.com/barbed-tube-adapter-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Purchase premium-grade Barbed Tube Adapter from us at competitive prices, as we are counted among popular suppliers of the product. We are working with an aim of making available flawless lot of products and for this; we check the product quality on several grounds. Hose Connector Sleeves http://www.valvola.com/hose-connector-sleeves-supplier.htm http://www.valvola.com/hose-connector-sleeves-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 To ensure maximum quality retention, we package our products in industrial-grade packaging materials that can brave mechanical damages and logistical jostling. Additionally, they are labeled to impart product information. The offered lot is in complete compliance with the industry standards thus, high in demand. Forged Socket Weld And Threaded Fittings http://www.valvola.com/forged-socket-weld-and-threaded-fittings-exporter.htm http://www.valvola.com/forged-socket-weld-and-threaded-fittings-exporter.htm Fri, 13 Apr 2018 00:00:00 +0530 To minimize the human interference, we have incorporated automated systems and thus, we are capable of maintaining high standards in terms of quality, space or delivery of the products. Payment methods that we offer to our clients are authorized and maintain complete confidentiality of clients' information. With us, one can make payment using cash and bank transfers. Stainless Steel Pipes & Tubes http://www.valvola.com/stainless-steel-pipes-tubes-supplier.htm http://www.valvola.com/stainless-steel-pipes-tubes-supplier.htm Fri, 13 Apr 2018 00:00:00 +0530 Located in Mumbai(India), our organization is involved in catering to the market with a qualitative array of products. Broad connectivity, dependable transportation facilities, we deliver the product basket to the customers within the devoted time. Bellow Sealed Valves http://www.valvola.com/bellow-sealed-valves.htm http://www.valvola.com/bellow-sealed-valves.htm Valves Fri, 04 May 2018 00:00:00 +0530 Hex Pipe Fittings http://www.valvola.com/hex-pipe-fittings.htm http://www.valvola.com/hex-pipe-fittings.htm Fittings Fri, 13 Apr 2018 00:00:00 +0530 Hose Fittings http://www.valvola.com/hose-fittings.htm http://www.valvola.com/hose-fittings.htm Fittings Hex Pipe Fittings Fri, 13 Apr 2018 00:00:00 +0530 Weld Fittings http://www.valvola.com/weld-fittings.htm http://www.valvola.com/weld-fittings.htm Fittings Hex Pipe Fittings Fri, 13 Apr 2018 00:00:00 +0530 Olets http://www.valvola.com/olets.htm http://www.valvola.com/olets.htm Fittings Fri, 13 Apr 2018 00:00:00 +0530